Sensepoint XRL

  • SPXRL-BT-cULus-O2 25.0%VOL-mA-YEL

    SPXRL-BT-cULus-O2 25.0%VOL-mA-YEL

    $1,050.00
  • SPXRL-BT-cULus-CO 300ppm-mA-YEL

    SPXRL-BT-cULus-CO 300ppm-mA-YEL

    $1,050.00
  • SPXRL-BT-cULus-H2S 50ppm-mA-YEL

    SPXRL-BT-cULus-H2S 50ppm-mA-YEL

    $986.00

Sensepoint XRL

Sensepoint XRL is a fixed point gas detector with Bluetooth that allows the user to connect the gas detector to a smartphone or tablet running the Sensepoint gas detector app. Sensepoint XRL is available as a flammable gas detector for the detection of potentially explosive gases, or as a toxic gas detector for the detection of a range of toxic gas hazards commonly found in industrial applications.

Sensepoint XRL is designed with simple and quick installation in mind. And for initial calibration, all you need is the Sensepoint App on your smartphone and a cylinder of calibration gas — no need for walkie-talkie guidance with the control room. Use the Sensepoint App to create a profile for the detector, choose alarm set points, run test procedures and automatically generate a commissioning report, which you can send from your phone to other stakeholders or store for easy access in a safety inspection. No need for paperwork.

Sensepoint XRL's smartphone-based experience significantly reduces the time you spend on gas detector maintenance. And when doing maintenance checks, our Sensepoint App puts diagnostic information at your fingertips.

It has bright indicator lights visible from a distance, making it easy to locate a detector requiring maintenance. And the Bluetooth connection is non-intrusive so there is no need for a hot work permit.

You can also save valuable time with easy reporting on the Sensepoint App. Whether you need a maintenance report for a certain detector or a gas history for a safety audit, just select the right report on the app and send it to other parties — or store it for easy recall. For a complete gas leak detection system, Sensepoint XRL has the perfect partner in Touchpoint Plus, a configurable, easy-to-use controller for up to sixteen channels of gas detection.
  • Manage installation, commissioning and maintenance from the gas detector app on your smartphone or tablet
  • Award-winning design
  • Robust aluminum housing
  • Worldwide hazardous area approvals
  • Compatible with Touchpoint Plus and other industry-standard controllers
  • Manufacturing facilities and factories
  • Water treatment plants
  • Battery charging facilities
  • Vehicle test facilities
  • Petrochemical plants
  • Fueling depots
Physical Properties
Dimensions18 x 159 x 93 mm (4.4 x 6.2 x 3.6 in)
Weight1400 g (3.1 lb)
Casing MaterialAluminum alloy LM20 (charcoal or yellow)
Ingress Protection RatingIP66, NEMA 4X
Lifetime10 years (excludes sensor)
Available Sensors
Flammable, Toxic Gases and Oxygen RangesCombustible0 to 100 % LEL (adjustable between 20 and 100% LEL, Factory calibrated to Methane)
O₂0 to 25% vol
CO0 to 300 ppm (adjustable between 50 and 1000 ppm)
H₂0 to 1000 ppm
H₂S Low Range0 to 50 ppm (adjustable between 10 and 50 ppm)
H₂S High Range0 to 100 ppm (adjustable between 50 and 200 ppm)
Power Supply
DC Input Voltage24 V DC
AC Input Voltage24 V AC, 50/60 Hz
Inrush Current850 mA
Output
Analog Output0 to 22 mA
Digital OutputModbus RTU
Maximum Power Consumption
mA Versions< 1.5 W (toxic), < 2.6 W (flammable)
Modbus Versions< 1.0 W (toxic), < 2.0 W (flammable)
Connection
TypePluggable rising clamp style, 0.5 to 2.5 mm2, 20 to 13 AWG
User Interface
Visual IndicatorMulti-color LED light ringFlashing green: Normal
Flashing red: Alarm
Flashing green and yellow: Warning
Flashing yellow: Fault
Solid yellow: Inhibited
Flashing blue: Bluetooth pairing in progress
Solid blue: Bluetooth connection established
Wireless InterfaceBluetooth 4.0 (Bluetooth Low Energy). Dedicated
mobile app, enabling wireless configuration and
maintenance. Connect up to 10 m (30 ft) away
(mobile device dependent). Use a compatible
smartphone or other mobile device running Android
4.3 or above.
Operating Environment
Operating Temperature−40 to 65 °C (−40 to 140 °F)
Storage Temperature0 to 30 °C (32 to 86 °F)
Humidity0 to 99% (non-condensing)
Atmospheric Pressure90 to 110 kPa
Certifications
Electrical SafetyEN/IEC/UL 61010-1 CSA C22.2 No. 61010-1-12
EMCEN 50270:2015
RadioRED, FCC, IC
Hazardous AreaATEXII 2 GD
Ex db IIC T6 Gb
Ex tb IIIC T85 °C Db
Tamb −40 to +65 °C
IECExEx db IIC T6 Gb
Ex tb IIIC T85 °C Db
Tamb −40 to +65 °C
cULusClass I, Division 1 & 2, Groups B, C and D
Class II, Division 1 & 2, Groups E, F and G
Class I, Zone 1, AEx db IIC T6
Zone 21, AEx tb IIIC T85°C, IP6X
Ex db IIC T6 GbX
Ex tb IIIC T85°C DbX
Tamb −40 to +65 °C, Temp Code T6
Gas PerformanceCSA C22.2 No.152-M1984, UL 2075, AS 1668.2
  • Placeholder

    Honeywell Carrying Case Cal Kit

    $87.81
  • Placeholder

    Collecting cone for use with lighter than air gases

    $99.00
  • Placeholder

    Enclosed weather protection housing with bump port

    $82.00
  • Placeholder

    Inert Tubing Tygon 3/16 ID x 5/16 OD – price is per foot…specify length when ordering

    $7.41
  • Placeholder

    Pipe Mounting Bracket Kit

    $134.00
  • Placeholder

    Regulator 715 0.5 LPM

    $174.00
  • Placeholder

    SPXRL-Calibration Cap

    $87.00
  • Placeholder

    SPXRL-Duct Mount Kit

    $244.00
  • Placeholder

    SPXRL-Flow Housing

    $116.00
  • Placeholder

    Sensepoint XRL Replacement Sensor – Cl2

    $137.54
  • Placeholder

    Sensepoint XRL Replacement Sensor – SO2

    $137.54
  • Placeholder

    Sensepoint XRL-Module Set-ATEX/IECEx-mA – CO

    $627.00
  • Placeholder

    Sensepoint XRL-Module Set-ATEX/IECEx-mA – Flammable Cat

    $673.00
  • Placeholder

    Sensepoint XRL-Module Set-ATEX/IECEx-mA – H2

    $627.00