Calibration Stations

RKI SDM-2009 Calibration Station

RKI’s new SDM-2009 calibration station for the GX-2009 is now available with advanced features for charging, calibration, & bump testing. Once you power up the GX-2009 inside the SDM-2009 calibration module, the GX-2009’s display will indicate whether it’s transmitting data, bump testing, calibrating, as well as the results of the bump test or calibration.

Multi Module System

The SDM-2009 can also be connected to a PC for automated calibration, bump testing, and archiving of logged data including calibration and bump test records, interval and alarm trends. Network up to 10 SDM-2009 stations to charge, calibrate, and bump test 10 instruments simultaneously.

User Guide Poster

Each SDM-2009 ships with a pictorial wall chart user guide. This guide gives the already easy to use cal station a simple pictorial easy step by step guide to calibrating or bump testing a GX-2009. It’s ideal to hang in an instrument shop or wherever the SDM-2009 is located.
Stand Alone Station
  • Stand-alone station (no PC Required)
  • Charging
  • Calibration
  • Bump Test
  • Save Bump Test and Calibration records
  • Bump test and calibration records copy to USB jump drive
  • Includes PC software for viewing/ archiving bump test and calibration records
Multi Module System
  • Multiple modules connected to a PC (10 max)
  • Charging
  • Calibration
  • Bump Test
  • Automatic calibration/bump test option
  • Configure GX-2009 parameters
  • Archive Bump Test and Calibration records
  • Archive data to network location
  • Software controlled data retrieval
  • Windows 7 compatible
Input Power12 VDC
NOTE: AC Adapter with 100 - 240 VAC, 50/60 Hz, 0.6A input and 12 VDC, 1.2A output provided as standard.
Environmental Conditions• For Indoor Use Only
• -10° C to 40° C, below 80% Relative Humidity, Non-Condensing
Applicable InstrumentsGX-2009
Memory Capacity64 KB
Maximum Record Size256 bytes
Maximum Number of Records Saved200
Number of Calibration Gas CylindersOne calibration gas cylinder per bump test or calibration
Standard Accessories• AC Adapter
• USB Flash Drive
• Single Module Data Viewer Program
• SDM-GX Docking Station PC Controller Program
• Inlet Air Filter
• Instruction Manual
• 10 Foot Long Exhaust Tube
• One 3 Foot Long Tube for GAS Fitting
• 10 Foot Long 3/16 Inch Tube for GAS manifolding
• 2 T-Fittings
• Check Valve
• USB Cable, Type A to Type B

Showing all 4 results