Home
>
Products
>
Gas Detection
>
Fixed Gas Detection
>
Detector Heads
>
35-3000RK
>
35-3000, LEL/O2/ H2S/ CO sample draw assembly in NEMA 4X enclosure with transmitters
Our Price:
$
2,900.00
Product Code:
35-3010RKA-01
Qty:
Features
Technical Specs
Extended Info
Part #
LEL
35-3000RKA-LEL
O
2
35-3000RKA-O2
H
2
S
35-3000RKA-H2S
Min Operating
Voltage
23 VDC
Max Operating
Voltage
30 VDC
Max Current
Draw
250 mA
200 mA
Signal Output
4 mA at 0% LEL
20 mA at 100% LEL
4 mA at 0 % Oxygen
20 mA at 25%
Oxygen
4 mA at 0 ppm H
2
S
20 mA at 100 ppm
H 2 S
Response
Time
30 seconds to 90%
of concentration
20 seconds to 90%
of concentration
45 seconds to 90% of concentration
Operating Environment
Location
Indoor or outdoor
Temperature
30 to 120° F
Humidity
0 - 99% RH, non condensing
Housing
Wall mounting grey polycarbonate with hinged cover. NEMA 4X
Sensor Type
Catalytic
Combustion
Galvanic Cell
Electrochemical
Life Expectancy
1 to 2 years normal service
2 years normal service
2 years normal service
Dimensions
Height 8.5" (216 mm)
Width 7.0" (178 mm)
Depth 4.3" (109 mm)
Sampling Method
Sample draw pump
Display
Flow meter, LED's for operational status; pilot, fail
Warranty
One year, materials and workmanship
Part #
CO
35-3000RKA-CO
HC
35-3000RKA-HC
Min Operating
Voltage
23 VDC
Max Operating
Voltage
30 VDC
Max Current
Draw
200 mA
250 mA
Signal Output
4 mA at 0 ppm CO
20 mA at 300 ppm CO
4 mA at 0 ppm 20 mA at 500 ppm
Hexane. Linear.
Response
Time
30 seconds to 90% of concentration
Operating Environment
Location
Indoor or outdoor
Temperature
30 to 120° F
Humidity
0 - 99% RH, non condensing
5 - 95% RH, non condensing
Housing
Wall mounting grey polycarbonate with hinged cover. NEMA 4X
Sensor Type
Electrochemical
Metal Oxide
Semiconductor
Life Expectancy
2 to 3 years normal service
5 to 10 years typical
Dimensions
Height 8.5" (216 mm)
Width 7.0" (178 mm)
Depth 4.3" (109 mm)
Sampling Method
Sample draw pump
Display
Flow meter, LED's for operational status; pilot, fail
Warranty
One year, materials and workmanship
The 35-3000RK series is a compact sample draw detector assembly with a built-in pump that accepts a 24VDC input. This
unit features a NEMA 4X enclosure making it dust, water and corrosion resistant. It also features a flowmeter with
adjustable flow and a low flow alarm which warns of any obstructions or restrictions in the flow system. Combustibles, oxygen,
hydrogen sulfide and carbon monoxide versions are available with or without a 4-20 mA transmitter. The 35-3000RK
is also available with both LEL and oxygen sensors in one unit.
The 35-3000RK is capable of single person calibrations and remote sampling at up to 5,000 ft. from a controller, and interfacing
to any RKI or third party control system (utilizing a 4-20 mA feedback signal). Multigas versions of this efficient sample
draw system are available with up to four sensors, LEL, O2, H2S and CO all in one enclosure. This is a very cost effective
way of monitoring for several gases that may be in the same place.
Features
NEMA 4X enclosure
Long life pump
Flowmeter and LED's for operational status
Low flow indication
Operates on 24VDC input
Multigas versions available with up to 4 sensors i one enclosure
LEL and O2 available with or without transmittter
LEL and O2 available together in one standard compact enclosure
Accessories for this product...
LEL combustible sensor only, NC-6240 (for sample draw 35-3000)
Our Price:
$220.00
Add
Share your knowledge of this product with other customers...
Be the first to write a review