Gasclip Multi Gas Clip 4 Gas detector with internal pump & infrared LEL sensor

$1,145.00

Description

Detects hydrogen sulfide (H2S), carbon monoxide (CO), oxygen (O2) & combustible gases (LEL).

Multi Gas Clip Pump

A New Option in Portable Gas Detection

Twice a day, every day… that’s how often you have to charge most portable gas detectors, until now. The Multi Gas Clip Pump (MGC Pump) from Gas Clip Technologies is the only portable multi gas detector with an internal sampling pump that can run 52 hours continuously without a charge.

A Long-Lasting Family Tradition

The MGC Pump follows in the long line of portable gas detectors by Gas Clip Technologies that last and last and last. Being able to go a long time between charges is a family tradition.

The Secret to a Long Life

Like our MGC, the MGC Pump uses low-power photometric infrared technology to detect combustible gases (LEL) rather than age-old pellistor technology. The MGC Pump uses an IR source which conserves power and helps the battery last and last.

Ergonomic Design Makes for a Good Fit

The MGC Pump is also designed for comfort. The reduced, sloping shape of the holding area at the bottom of the instrument makes the MGC Pump a comfortable fit in the hands of your workers. It is fully submersible and simple to operate. The MGC Pump offers a one button design and the largest LCD screen in the industry so it’s easy to read.

Calibrate the MGC Pump Once Every 12 Months

Other multi gas detectors require calibration anywhere from 1 to 3 months. The MGC Pump can go 12 months without being calibrated. This is an added benefit of IR sensing technology because IR is immune to pellistor sensor poisons such as silicone or H2S.
  • 52 hour continuous run time
  • 1 year calibration cycle
  • Will work in inert environments, no need for oxygen
  • Draws up to 75 feet
  • Stainless steel gas inlet
  • Size: 5.7 x 3.0 x 1.5 in. (147 x 78 x 38.3 mm.)
  • Weight: 12.4 oz. (352 g)
  • Temperature: -4˚F to +122˚F (-20˚C to +50˚C)
  • Humidity: 5% to 100% RH (non-condensing)
  • Battery Life:
    • IR: 5 days continuous
    • Pellistor: 30 hours continuous
  • Charge Time: 4-6 hours
  • Alarms: Visual, Vibrating, Audible (minimum 95dB) Low, High, STEL, TWA, OL (Over Limit), Pump
  • LEDs:
    • 4 red alarm bar LEDs
    • Yellow backlight (activated on button press)
    • Red backlight (activated on alarm condition)
    • Yellow Maintenance Notification LED
  • Display: Alphanumeric Liquid Crystal Display (LCD)
  • Logs:
    • 25 Bump Tests
    • 25 Events
    • 25 Calibrations
    • Continuous 1-second data logging (> 2 months typical capacity)
  • Tests:
    • Full function self-test upon activation
    • Sensors, battery and circuitry continuous
  • Ingress Protection: IP 67
  • Warranty: Full 2 years
  • Gas Inlet: 1/8” barbed fitting
  • Pump draw: Sample from up to 75 ft. (23 m), approximately 2 ft/second with 1/8” tubing
  • Gases:
    • H2S: 0 – 100.0 PPM (0.1 PPM increments)
    • CO: 0 – 500 PPM (1 PPM increments)
    • Combustible: 0 – 100.0 %LEL (0.1% LEL increments)
    • O2: 0 – 30.0 % vol. (0.1% vol. increments)
  • Sensor Type:
    • H2S, CO, O2: Single plug-in electrochemical cell
    • Combustible: Plug-in Infrared (IR) or Pellistor
  • User Options: User Message, Language, Low Alarm, High Alarm, STEL Alarm, TWA Alarm, TWA Method, TWA Interval, STEL Interval, SAFE, Maintenance Notification, Self-test Lock, Dock Lock, Pump Test, Sensor Enable, Calibration Interval, Bump Interval, Calibration Gas
  • Approvals:
    • CSA: Class 1, Division 1, Group A, B, C, and D Class 1, Zone 0, AEx ia IIC T4 Ga C22.2 No.’s 0, 152, 157
    • IECEx: Ex ia IIC T4 Ga IECEx CSA xx.xxxxx IEC 60079-0:2011, 60079-11:2011, 60079-26:2006
    • ATEX: SIRA 13 ATEX ****X CE II 1 G Ex ia IIC T4 Ga EN 60079-0:2012, 60079-11:2012, 60079-26:2007 EN 50270 ANSI/ISA S12.13.01 UL-913
    • INMETRO: NCC xx.xxxxx Ex ia IIC T4 Ga (-20°C ч Ta ч 50°C)