Gasclip Multi Gas Clip Simple 2 year 4 Gas detector with no charging or calibration necessary & infrared combustible gas (LEL) sensor

$645.00

Description

Multi Gas Clip Simple

Gas Detection Made Simple

No charging ever! No calibration necessary! (Can be calibrated if required)

Reliably test for hydrogen sulfide (H2S), carbon monoxide (CO), oxygen (O2) and combustible gases (LEL) with this simple-to-use and simple-to-maintain detector. Just turn it on and have worry free assurance of protection against toxic gases 24/7 for two full years.

Low power usage is the key!

Gas Clip Technologies’ continued refinement of advanced low-power photometric infrared technology for combustible gas measurement helps make gas detection simpler and safer than ever. The newest member of their gas detector family, the Multi Gas Clip Simple, features no charging ever and no calibrating necessary. It's SIMPLE to use!
  • 2 year run time - 2 year life!
  • 2 year warranty. For any service, please call our service center.
  • No charging ever! No calibration necessary!
  • Large, easy to read screen
  • Simple One Button Operation
  • Works in oxygen enriched and oxygen deficient environments
  • Continuous 1 second data logging
  • LEL sensor is immune to H2S & silicone poison
  • Assembled in USA
  • Compatible with MGC Simple Dock or MGC Simple Wall Mount Dock
Size4.75 H x 2.75 W x 1.25 D in. (120.65 x 69.85 x 31.75 mm.)
Weight7.675 oz. (220.2 g)
Temperature-4˚F to +122˚F (-20˚C to +50˚C)
Humidity5% to 95% RH (non-condensing)
Battery Life730 days continuous, based on an average of 1.5 minutes/day of alarm condition
AlarmsVisual, Vibrating, Audible (minimum 95dB) Low, High, STEL, TWA, OL (Over Limit)
LEDs4 red alarm bar LEDs
Yellow backlight (activated on button press)
Red backlight (activated on alarm condition)
Yellow Maintenance Notification LED
DisplayAlphanumeric Liquid Crystal Display (LCD)
Logs25 Bump Tests
25 Events
25 Calibrations
Continuous 1-second data logging (> 2 months typical capacity)
TestsFull function self-test upon activation
Sensors, battery and circuitry continuous
Ingress ProtectionIP 68
WarrantyFull 2 years
GasesH2S0 – 100.0 PPM (0.1 resolution), <2 ppm accuracy, <30s
CO0 – 500 PPM (1 resolution), <5 ppm accuracy, <30s
Combustible0 – 100.0 %LEL (0.1 resolution), <5% LEL accuracy, <30s
O20 – 30.0 % vol. (0.1 resolution), <0.7% vol. accuracy, <15s
Sensor TypeH2S, CO, O2Single plug-in electrochemical cell
CombustibleSoldered infrared (IR)
User OptionsUser Message, Language, Low Alarm, High Alarm, STEL Alarm, TWA Alarm, TWA Method, TWA Interval, STEL Interval, SAFE, Maintenance Notification, Self-test Lock, Dock Lock, Sensor Enable/Disable, Calibration Interval, Bump Interval, Calibration Gas, %-by-volume, Latching Alarms
ApprovalsCSAClass I, Division 1, Group A, B, C, and D Class I, Zone 0, A/Ex ia IIC T4 Ga C22.2 No. 152-M1984 ANSI/ISA S12.13
IECExCSA 16.0038 Ex ia IIC T4 Ga IEC 60079-0:2011 IEC 60079-11:2011
ATEXSIRA 16ATEX2288 CE 0518 II 1 G Ex ia IIC T4 Ga (-20°C ≤ Ta ≤ +50°C) EN 60079-0:2012/A11:2013 EN 60079-11:2012
  • Placeholder

    Back Case for MGC Simple & MGC Simple Plus

    $25.00
  • Placeholder

    Dock Ethernet Conversion

    $700.00
  • Placeholder

    Dock Gas Cylinder Strap

    $10.00
  • Placeholder

    Dock Quick Coupler

    $15.00
  • Placeholder

    Dock USB replacement (for all GCT Clip Docks)

    $22.00
  • Placeholder

    LCD Screen Kit for MGC Simple & MGC Simple Plus

    $30.00
  • Placeholder

    Manual Regulator (non-dock use) use with all GCT detectors except MGC Pumps

    $175.00
  • Placeholder

    MGC Simple Clip Dock Ethernet

    $2,995.00
  • Placeholder

    MGC Simple Clip Dock Wall Mount Ethernet

    $2,995.00
  • Placeholder

    Air Stone Particulate Filters – 3 Pack

    $15.00
  • Placeholder

    Alligator Clip replacement (for use with all GCT detectors)

    $10.00
  • Placeholder

    Alligator Clip Screw replacement (for use with all GCT detectors)

    $0.50
  • Placeholder

    Bubble Label for MGC Simple replacement

    $3.00
  • Placeholder

    Calibration Cap replacement (for use with MGC-S & MGC-S-PLUS)

    $10.00
  • Placeholder

    Calibration Hose – 3 ft Tygon ID-1/8″ (3.18mm), OD-1/4″ (6.35 mm)

    $12.00
  • Placeholder

    Case Screw for MGC Simple & MGC Simple Plus replacement

    $0.50
  • Placeholder

    Confined Space Kit for MGC Simple & Simple Plus

    $485.00
  • Placeholder

    Confined Space Kit for MGC Simple & Simple Plus with 58L Quad Gas (25 ppm H2S, 100 ppm CO, 18% O2 & 50% LEL)

    $685.00
  • Placeholder

    Dock Charger replacement – std. 110v power supply (for all GCT Clip Docks)

    $25.00