GP-1000 sample draw combustible detector for methane, 0 – 10% LEL / 100% LEL

$1,100.00

SKU: 72-0076-CH4-01 Categories: , , , Tags: ,

Description

Also includes carrying case and screen protector.

GP-1000 72-0076-CH4-01

The Combustible Gas Monitor Model GP-1000 is a gas monitor designed to provide continuous monitoring of exposure to combustible gas in hazardous areas. The measuring range of GP-1000 is 0-100% LEL. The gas sample is sucked in by built-in micro pump. Power supply is only with four series connected Alkaline AA batteries. Battery exchange in a hazardous area is not performed.
ModelGP-1000
Gas to be detectedCombustible gas (CH4, HC, etc.)
Detection principleCatalytic combustion type
Measurement range0-100% LEL
Alarm typeGas Alarm: Self-latching, two-step alarm
Fault alarm: Low flow rate, poor sensor connection, low battery voltage, circuit abnormality and calibration range abnormality
Alarm operationGas Alarm: Intermittent buzzer sound, blinking alarm lamp (red) and blinking gas concentration display
Fault alarm: Intermittent buzzer sound, blinking alarm lamp (red) and fault detail display
Alarm setpoint1st: 10% LEL
2nd: 50% LEL
Accuracy of the reading±5% of full scale (under the same conditions)
Response time90% response: Within 30 seconds
Alarm delay time30 seconds or less
Detection methodPump suction type with a flow rate of 0.3 L/min or more (pump L mode)
DisplayLCD seven-segment numeric display, bar meter display (50 divisions) and status information display
Seven-segment digital display: 0-100% LEL
Digital bar meter display:
- Auto range switching
- 0-10% LEL (L range)
- 0-100% LEL (H range)
Power supply4 AA alkaline dry batteries
Continuous operating time20 hours or more (new dry batteries, without alarms or lighting, at 25℃)
Operating environmentOperating temperature range: -20 - 50℃
Operating humidity range: Below 95% RH (Non-condensing)
External dimensionsApprox. 80.1 (W) x 124 (H) x 36 (D) mm (projection portions excluded)
WeightApprox. 260 g (without batteries)
Drip-proof and dust-proof performancesCompliant to IP67
Explosion-proof performanceIntrinsically safe explosion-proof structure ExiaIICT4
Certification, etc.Explosion-proof certification: IECEx, ATEX
FunctionsLCD backlight, data logger, log data display, peak display, switching pump performance between strong and weak, changing a reading target gas
Standard accessoriesPower supply: 4 AA alkaline dry batteries
Storage: Hand strap
Sampling: Gas sampling hose (1 m) and sampling probe
Optional accessories- 30 m hose, dedicated leather case, diluter, spiral hose
- Data logger management program
  • Wrist strap

    Wrist strap, GX-2009/GX-2012

    $4.00
  • Placeholder

    LCD protection film for instrument display for GX-6000, GP-1000, & NC-1000

    $5.40
  • Placeholder

    LCD protection film for instrument display, pack of 5 for GX-6000, GP-1000, & NC-1000

    $30.00
  • Pump replacement for GX-2012 and RP-2009, with cable and connector

    $140.00
  • Teflon filter disc, 10 pieces, RP-2009/RP-6/GX-2003/GX-2012/Gas Tracer/GX-6000

    $24.00
  • Placeholder

    Battery, lithium, CR 1220, for main PCB, GX-2012 / Gas Tracer

    $4.40
  • Placeholder

    Batter lid locking plate for FP-31, GP-1000,& NC-1000

    $2.00
  • Placeholder

    Battery lid for FP-31, GP-1000, & NC-1000

    $5.40
  • Placeholder

    Carrying case with shoulder strap for GP/NC-1000

    $110.00
  • Placeholder

    Diluter (Gas: Air = 1:1)

    $88.00
  • Placeholder

    Gasket for sensor, fluorine contained rubber for GP-1000 & NC-1000

    $5.40
  • Placeholder

    H2S removal cartridge filter CF-8390

    $46.00
  • Placeholder

    Hydrophobic filter for main case of GP-1000 & NC-1000

    $3.60
  • Placeholder

    LCD Module for GP-1000 & NC-1000

    $50.00
  • Placeholder

    Probe with hydrophobic filter, dust filter, no scrubber section, for GX-6000 (not for Cl2 use)

    $35.00
  • Placeholder

    Probe with tube, GF-267 for GX-6000

    $26.00
  • Placeholder

    Screw M3 x 8, SUS304

    $2.00
  • Placeholder

    Silicone removal cartridge filter CF-8391

    $46.00
  • RKI GP-1000 Calibration Kit, 34AL 50% CH4 in air

    $465.00
  • Placeholder

    Sensor, LEL, NC-6215, GX-8000 and GP-1000

    $360.00

Additional information

Weight 0.57 lbs
Dimensions 1.42 × 3.15 × 4.88 in