Honeywell MIDAS Sensor Cartridge for Carbon Dioxide ECC cartridge 0.15-2.00 % v/v

$423.00

Description

Honeywell MIDAS Sensor Cartridge for Carbon Dioxide ECC cartridge 0.15-2.00 % v/v

Several Honeywell MIDAS® cartridges can be configured to read a number of different gases based on a common chemical family. Actual details for the sensor detection range are included in the sensor cartridge specification sheet and the MIDAS® technical manual. MIDAS® sensor cartridges can be ordered as part of a Kit with the universal MIDAS® transmitter, or as a replacement part. The detectable range is listed. With the exception of O2 (where ambient concentration is typically 20.9%), the sensors will display zero when no gas is present. All Cartridges with the format MIDAS-E-XXX are supplied with a 2 year (24 month) warranty.
Gas MeasuredCarbon Dioxide (CO2)
Cartridge Part NumberMIDAS-E-CO22 year extended warranty
Sensor Technology3 electrode electrochemical cell
Measuring Range (ppm)CO20 – 2% v/v
Minimum Alarm 1 Set Point2500 ppm
Repeatability< ± 0.06% v/v
Linearity< ± 15% of measured value
Response Time t62.5< 70 seconds
Sensor Cartridge Life Expectancy≥ 24 months under typical application conditions
Operating Temperature0°C to +40°C (32°F to 104°F)
Effect of Temperature< 0.0039% vol / °C (0°C to 20°C)
Zero< ± 0.0053% vol /°C (20°C to 40°C)
Sensitivity< 1.9% of measured value / °C (0°C to 20°C)
< ± 0.9% of measured value / °C (20°C to 40°C)
Operating Humidity (continuous)15 – 95% rH
Effect of HumidityZeroNo effect
Sensitivity< ± 1% of measured value / % rH
Operating Pressure90 – 110kPa
Effect of PositionNo effect in typical application
Long Term DriftZero< +0.3% vol / year
Sensitivity< 30% of measured value / 1 year
Calibration GasCarbon Dioxide (CO2)
Challenge Gas (Bump Test)Carbon Dioxide (CO2)
Warm Up Time< 20 minutes
Storage Temperature+5°C to +25°C (+41°F to +77°F)
Cross Sensitivities

Each Midas sensor is potentially cross sensitive to other gases and this may cause a gas reading when exposed to other gases than those originally designated. The table below presents typical readings that will be observed when a new sensor cartridge is exposed to the cross sensitive gas (or a mixture of gases containing the cross sensitive species).
Gas / VaporChemical FormulaConcentration applied (ppm)Reading (ppm CO2)
Carbon MonoxideCO500< 0.05
ChlorineCl22< 0.05
HydrogenH21000< 0.05
Hydrogen SulfideH2S75< 0.05
MethaneCH420000< 0.05
Nitrogen DioxideNO250< 0.05
Sulfur DioxideSO250< 0.05
MethanolCH3OH1000< 0.05

Additional information

Weight 1 lbs