Honeywell MIDAS Sensor Cartridge for Hydrogen Sulfide (H2S) 3.6-40 ppm

$367.00

Description

Honeywell MIDAS Sensor Cartridge for Hydrogen Sulfide (H2S) 3.6-40 ppm

Several Honeywell MIDAS® cartridges can be configured to read a number of different gases based on a common chemical family. Actual details for the sensor detection range are included in the sensor cartridge specification sheet and the MIDAS® technical manual. MIDAS® sensor cartridges can be ordered as part of a Kit with the universal MIDAS® transmitter, or as a replacement part. The detectable range is listed. With the exception of O2 (where ambient concentration is typically 20.9%), the sensors will display zero when no gas is present. All Cartridges with the format MIDAS-E-XXX are supplied with a 2 year (24 month) warranty.
Gas MeasuredHydrogen Sulfide (H2S)
Cartridge Part NumberMIDAS-E-H2S2 year extended warranty
Sensor Technology3 electrode electrochemical cell
Measuring Range (ppm)H2S0 – 40 ppm
Minimum Alarm 1 Set Point5.0 ppm
Repeatability< ± 3% of measured value
Linearity< ± 4% of measured value
Response Time t62.5< 10 seconds
Sensor Cartridge Life Expectancy≥ 24 months under typical application conditions
Operating Temperature0°C to +40°C (32°F to 104°F)
Effect of Temperature< ± 0.0015 ppm / °C (0°C to 20°C)
Zero< ± 0.004 ppm / °C (20°C to 40°C)
Sensitivity< ± 0.7% of measured value / °C
Operating Humidity (continuous)15 – 90% rH
Effect of HumidityZero< ± 0.04 ppm / % rH
Sensitivity< ± 0.5% of measured value / % rH
Operating Pressure70 – 110kPa
Effect of PositionNo effect in typical application
Long Term DriftZeroTBA
Sensitivity< ± 10% of measured value / year
Calibration GasHydrogen Sulfide (H2S)
Challenge Gas (Bump Test)Hydrogen Sulfide (H2S)
Warm Up Time< 10 minutes
Storage Temperature+5°C to +25°C (+41°F to +77°F)
Cross Sensitivities

Each Midas sensor is potentially cross sensitive to other gases and this may cause a gas reading when exposed to other gases than those originally designated. The table below presents typical readings that will be observed when a new sensor cartridge is exposed to the cross sensitive gas (or a mixture of gases containing the cross sensitive species).
Gas / VaporChemical FormulaConcentration Applied (ppm)Reading (ppm H2S)
AmmoniaNH3500
Carbon DioxideCO250000
Carbon MonoxideCO500
ChlorineCl20.50
EthyleneC2H41000
HydrogenH21000
Nitric OxideNO250
Nitrogen DioxideNO230
Sulphur DioxideSO220

Additional information

Weight 1 lbs