NC-1000 sample draw combustible detector for isobutane, 0 – 1000 ppm / 10,000 ppm

$1,895.00

SKU: 72-0077-HC Categories: , , , Tags: ,

Description

NC-1000 72-0077-HC

The combustible gas detector model NC-1000 is designed to detect leakage of combustible gases in a hazardous area continuously. The detection range of NC-1000 is 0 to 10,000 ppm. A sample of gas is drawn by the internal small pump. Only AA alkaline dry batteries are used for power supply. The dry batteries cannot be replaced in a hazardous area.
ModelNC-1000
Gas to be detectedCombustible gas (CH4, HC, etc.)
Detection principleNew ceramic
Measurement range0-10000 ppm
Alarm typeGas Alarm: Self-latching, two-step alarm
Fault alarm: Flow rate low, poor sensor connection, battery voltage low, circuit abnormality, and calibration range abnormality
Alarm operationGas Alarm: Continuous buzzer sound, blinking of red lamp and gas concentration display
Fault alarm: Intermittent buzzer sound, blinking of red lamp, fault detail display
Alarm setpoint1st: 250 ppm
2nd: 500 ppm
Detection methodPump suction type with a flow rate of 0.30 L/min or more (pump L mode)
DisplayLCD seven-segment numeric display, bar meter display (50 divisions) and status
information display
Seven-segment digital display: 0 - 10000 ppm
Digital bar meter display: Auto range switching
L range: 0 - 1000 ppm
H range: 0 - 10000 ppm
Power supply4 AA alkaline dry batteries
Continuous operating timeCH4 specification: Approx. 15 hours
HC specification: Approx. 20 hours
(new dry batteries, without alarms or lighting, at 25ºC)
Operating environmentOperating temperature range: -20 - +50ºC
Operating humidity range: Below 95% RH (Non-condensing)
Storage temperature range: -25 - +60ºC
Storage humidity range: Below 95% RH (Non-condensing)
External dimensionsApprox. 80.1 (W) x 124 (H) x 36 (D) mm (projection portions excluded)
WeightApprox. 260 g (without batteries)
Drip-proof and dust-proof performancesCompliant to IP67
Explosion-proof performance, Certification, etc.Intrinsically safe explosion-proof structure ExiaIICT4
Explosion-proof certification: IECEx, ATEX, TIIS, (CSA)
Others: CE marking
FunctionsLCD backlight, data logger, log data display, peak display,
switching pump performance between strong and weak, changing a reading target gas
Standard accessoriesPower supply: 4 AA alkaline dry batteries
Storage: Hand strap
Sampling: Gas sampling hose (1 m) and sampling probe
  • Wrist strap

    Wrist strap, GX-2009/GX-2012

    $4.00
  • Placeholder

    LCD protection film for instrument display for GX-6000, GP-1000, & NC-1000

    $5.40
  • Placeholder

    LCD protection film for instrument display, pack of 5 for GX-6000, GP-1000, & NC-1000

    $30.00
  • Pump replacement for GX-2012 and RP-2009, with cable and connector

    $140.00
  • Teflon filter disc, 10 pieces, RP-2009/RP-6/GX-2003/GX-2012/Gas Tracer/GX-6000

    $24.00
  • Placeholder

    Battery, lithium, CR 1220, for main PCB, GX-2012 / Gas Tracer

    $4.40
  • Placeholder

    Batter lid locking plate for FP-31, GP-1000,& NC-1000

    $2.00
  • Placeholder

    Battery lid for FP-31, GP-1000, & NC-1000

    $5.40
  • Placeholder

    Carrying case with shoulder strap for GP/NC-1000

    $110.00
  • Placeholder

    Diluter (Gas: Air = 1:1)

    $88.00
  • Placeholder

    Filter case, IP252BR1, for NC-1000

    $18.00
  • Placeholder

    Gasket for sensor, fluorine contained rubber for GP-1000 & NC-1000

    $5.40
  • Placeholder

    Hydrophobic filter for main case of GP-1000 & NC-1000

    $3.60
  • Placeholder

    LCD Module for GP-1000 & NC-1000

    $50.00
  • Placeholder

    Top cover assembly for NC-1000

    $178.00
  • RKI NC-1000 Calibration Kit, 34AL isobutane 500 ppm in air

    $465.00
  • Placeholder

    Sensor for NC-1000, catalytic

    $360.00
  • Placeholder

    Sensor, LEL, NC-6215, GX-8000 and GP-1000

    $360.00

Additional information

Weight 0.57 lbs
Dimensions 1.42 × 3.15 × 4.88 in