OX-600 oxygen monitor, 0-25%, 115 VAC operation with 3 meter sensor cable and power cord

$880.00

SKU: 72-1006-03 Categories: , , , , Tags: ,

Description

OX-600

The OX-600 is an indoor, standalone monitor that detects Oxygen (O2) with a range of 0-25.0 % volume with 0.1% increments. It’s sleek, low-profile design is equipped with a unique tri-color display, which changes color as oxygen levels reach each alarm level. The OX-600 has 2 preset alarms, and comes ready to operate with a simple wall mount bracket and 10 foot power cord. It is capable of operating with three different power options; 115 VAC, 24 VDC or alkaline batteries. If Oxygen is present, the user is notified by an audible alarm tone and the multicolored LED digital display. The OX-600 uses a fast responding low-cost plug-in style galvanic cell sensor. This long life sensor is field-replaceable with no special tools required. The sensor can also be remotely mounted with an optional remote sensor cable. Extender cable with remote box available in different lengths (3, 5, 10, or 20 meters)
  • Operates with or without a controller
  • Range of 0-25.0 % volume with 0.1% increments
  • Tri-color visual alarm display
  • 2 preset alarms; Green=Normal, Yellow=Alarm 1, Red=Alarm 2
  • Large easy to read digital display
  • Three power options: 115 VAC, 24 VDC, or 2 AA alkaline
  • Operates up to 1 year on one set of AA alkaline batteries
  • Pressure compensation eliminates false alarms caused by pressure change
  • Remote mount sensor cable available
  • Laboratories
  • Cryogenic environments
  • Clean rooms
  • Industrial gas facilities
  • Gas storage rooms
  • Indoor monitoring
  • Iron and steel industry
  • Warehouses
  • Tunnels and garages
  • Vehicle service areas
Detection Principle Galvanic cell
Gas Detected Oxygen (O2)
Detection Range 0 ~ 25 vol%
Display Resolution 0.1 vol%
Sampling Method Diffusion or remote sampling method with optional extender cable
Indication Accuracy* Within ±0.7 vol%
Response Time* 90% Response within 30 seconds
Alarm Delay Time* Within 5 seconds, after detecting 10 ~ 11 vol% gas at Oxygen deficiency alarm (18 vol% alarm).
Alarm Accuracy* Within ±1 vol% of preset alarms
Alarm Levels Two preset alarms (L-LL), alarm 1 = 19.0% vol, alarm 2 = 18.0% vol (other settings available)
Display of Alarm 1st gas alarm: gas concentration reading blinks or orange light, flashing AL1 light or orange light, buzzer 
2nd gas alarm: gas concentration reading blinks or red light, flashing AL2 light or red light, buzzer
Alarm Method Latching or Non-latching
Alarm Contact Dry contact, Form A or Form B, Form A standard Factory Setting, normally open (closed in ALARM)
Display Digital LCD (3 digits, 7 segments / Green, Orange, Red) (For Alkaline battery version, the back light will be OFF during normal operation)
Trouble Alarm / Self-Diagnosis System trouble / sensor connection trouble
Display of Trouble Alarm Buzzer / content indication (flashing of red error message)
Trouble Alarm Method Non-latching or Latching
Contact Capacity 125VAC, 1A or 30VDC, 1A (Resistive load)
Output Signal 4 ~ 20mA (Non-isolated, Resistive load under 300Ω) or 0DC-1V (Non-isolated) *only for 0DC-1V Alkaline battery specification
Extender Cable Extender cable with remote box (3m, 5m, 10m or 20m lengths available)
Power Sources 120VAC±10%, 50/60Hz, 24VDC±10%, or AA alkaline battery (2 each)
Power Consumption AC specification: MAX 3.5VA, DC specification: MAX 2W
Continuous Operation (for Alkaline Battery version) 1 year (no alarm, no indication)
Initial Clear About 25 seconds
Operating Temperature 0 ~ 104°F (no sudden change)
Operating Humidity Below 90%RH (non-condensing)
Mounting Equipment Wall mounting, sensor integrate type or remote type
Dimension Body: approx. 3.15”(W) x 4.72”(H) x 1.2”(D) (80(W) x 120(H) x 35.5(D)mm) Remote sensor: approx. 1.57”(W) x 3.78”(H) x 1.2”(D) 40(W) x 96(H) x 35.5(D)mm (exclude the protrusion)
Weight AC specification: approx. 7.05 oz (200g), DC specification: approx. 6.34 oz (180g), Alkaline battery specification: approx. 8.11 oz (230g) Remote sensor: approx. 1.94 oz (55g) (exclude the cable)

Additional information

Weight 0.441 lbs
Dimensions 1.2 × 3.15 × 4.72 in