RKI SDM-03 single point calibration station without AC Adaptor & 34AL cyl 50 ppm CO/N2

$1,595.00

Description

Also includes flash drive, USB cable, tubing, and demand flow regulator.

SDM-03 without AC Adaptor

(Requires AC adaptor, Part # 49-2058RK-04) The SDM-03 is a versatile maintenance tool that automates the testing service of a 03 Series portable gas monitor. This docking station can be used as a stand alone device for charging, calibration and bump testing, with all records stored automatically for future upload to a PC via USB flash drive (PC software and flash drive included).

Multi Module System

Automate how you manage and service 03 Series instruments by connecting the SDM-03 to a computer with a USB cable. With the SDM Docking Station controller software, you can simultaneously calibrate, bump test, or archive data for up to ten instruments. Also, download the data logging history from each instrument into one easy to manage locator. SDM-03 stations can be manifolded together to reduce the number of demand flow regulator gas cylinders required.

User Guide Poster Each SDM-03 ships with a pictorial wall chart user guide. This guide gives the already easy to use cal station a simple pictorial easy step by step guide to calibrating or bump testing a 03 Series. It’s ideal to hang in an instrument shop or wherever the SDM-03 is located.
Stand Alone Station
  • Stand-alone station (no PC Required)
  • Calibration
  • Bump Test
  • Save Bump Test and Calibration records
  • Bump test and calibration records copy to USB jump drive
  • Includes PC software for viewing/ archiving bump test and calibration records
Multi Module System
  • Multiple modules connected to a PC (10 max)
  • Calibration
  • Bump Test
  • Automatic calibration/bump test option
  • Configure 03 Series parameters
  • Archive Bump Test and Calibration records
  • Archive data to network location
  • Software controlled data retrieval
  • Windows 7 compatible
Multi Module System
    • Multiple modules connected to a PC (10 max)
    • Calibration
    • Bump Test
    • Automatic calibration/bump test option
    • Configure 03 Series parameters
    • Archive Bump Test and Calibration records
    • Archive data to network location
    • Software controlled data retrieval
    • Windows 7 compatible
Input Power12 VDC NOTE: AC Adapter with 100 – 240 VAC, 50/60 Hz,0.6A input and 12 VDC, 1.2A output provided as standard.
Environmental ConditionsFor Indoor Use Only

-10° C to 40° C, below 80% Relative Humidity, Non-Condensing
Applicable Instruments03 Series
Maximum Number of Records Saved200 (stand-alone). Unlimited with software
3 Ports1 Calibration gas
1 fresh air
1 exhaust
Standard AccessoriesAC Adapter
USB Flash Drive
Single Module Data Viewer Software
SDM-03 Docking Station PC Controller Program
Inlet Air Filter
Instruction Manual
10 Foot Long Exhaust Tube
One 3 Foot Long Tube for GAS Fitting
2 T-Fittings (for PC Controlled Configuration only)
10 Foot Long 3/16 Inch Tube for GAS manifold- ing (used for PC Controlled Configuration only)
Check Valve (used for PC Controlled Configuration only)
USB Cable, Type A to Type B

Additional information

Weight 1 lbs