RKI SDM-2012 calibration station with demand flow regulator, 58AL cyl H2S (25 ppm)/CO/CH4/O2 & 58L steel cyl Methane 100% volume

$1,920.00

Description

Also includes AC Adaptor, flash drive, USB cable, and tubing.

RKI SDM-2012 Calibration Station

RKI’s new SDM-2012 calibration station for the GX-2012 is now available with advanced features for charging, calibration, & bump testing. Once you power up the GX-2012 inside the SDM-2012 calibration module, the GX-2012’s display will indicate whether it’s transmitting data, bump testing, calibrating, as well as the results of the bump test or calibration.

Multi Module System

The SDM-2012 can also be connected to a PC for automated calibration, bump testing, and archiving of logged data including calibration and bump test records, interval and alarm trends. Network up to 10 SDM-2012 stations to charge, calibrate, and bump test 10 instruments simultaneously.

User Guide Poster

Each SDM-2012 ships with a pictorial wall chart user guide. This guide gives the already easy to use cal station a simple pictorial easy step by step guide to calibrating or bump testing a GX-2012. It’s ideal to hang in an instrument shop or wherever the GX-2012 is located.
  • Stand Alone Station
    • Stand-alone station (no PC Required)
    • Charging (Li-Ion Battery Pack)
    • Calibration
    • Bump Test
    • Save Bump Test and Calibration records
    • Bump test and calibration records copy to USB jump drive
    • Includes PC software for viewing/ archiving bump test and calibration records
  • Multi Module System
    • Multiple modules connected to a PC (10 max)
    • Charging
    • Calibration
    • Bump Test
    • Configure GX-2012 parameters
    • 2 Calibration gas ports
    • Archive Bump Test and Calibration records
    • Archive data to network location
    • Software controlled data retrieval
    • Automatic calibration/bump test option
    • Windows 7 compatible

Input Power

12 VDC NOTE: AC Adapter with 100 – 240 VAC, 50/60 Hz, 0.6A input and 12 VDC, 1.2A output provided as standard.

Environmental Conditions

• For Indoor Use Only • -10° C to 40° C, below 80% Relative Humidity, Non-Condensing

Applicable Instruments

GX-2012 and Gas Tracer

Maximum Number of Records Saved

200 (stand-alone)

Number of Calibration Gas Cylinders

Up to two calibration gas cylinders per bump test or calibration at a time

Standard Accessories

  • AC Adapter
  • USB Flash Drive
  • Single Module Data Viewer Software
  • SDM Docking Station PC Controller Software
  • Inlet Air Filter
  • Instruction Manual
  • 10 Foot Long Exhaust Tube
  • Two 3 Foot Long Tubes for GAS 1 and GAS 2 Fittings
  • 3 T-Fittings for PC Controlled Configuration
  • USB Cable, Type A to Type B

Additional information

Weight 1 lbs