S301-IRF

Note: Due to supply chain shortages, the lead time for S301-IRF products is currently around five months. If you have any questions, please give us a call at (973) 838-2244.

S301-IRF



Discreet design and rugged ABS-Polycarbonate housing for the 301IRFS set the standard for “at the source” gas detection in a chiller room. Mount directly to the chiller pad or low on the wall in close proximity to achieve early notifications in the event of a refrigerant leak.

Install Honeywell 301IRF sensor at low levels in chiller room for reliable detection of a variety of refrigerant gases. Requires installation with a 301EM-20 controller.
  • ASHRAE No 15-2001 Mechanical Standard and B-52 Code Compliance The ASHRAE and B-52 security standards have been established to minimize risk and protect the safety of mechanical room personnel and the environment at large. Honeywell’s 301IRF, together with the 301EM mechanical room controller, provides a complete solution that meets and even exceeds these rigorous standards. The 301EM can be configured to offer automatic fan, horn and strobe activation in addition to manual fan activation when the 301IRF detects a refrigerant.
  • User Friendly
    • State-of-the-art infrared sensor technology
    • LED indicator
    • Low-profile and rugged construction for low mounting in chiller/mechanical room
  • Economical Solution
    • Cost-effective answer for installation in areas where refrigeration gas hazards may be present
  • Detectable Gases
    • R11, R12, R13B1, R22, R123, R125, R134A, R227, R245A, R404A, R407C, R410A, R507A, R508B, R514A, HFO1233ZD, HFO1234ZE.
  • Mechanical Rooms
  • Chiller Rooms
UseInfrared refrigerant sensor to be used with the 301EM-20
Gases DetectedR11, R22, R123, R125, R134A, R404A, R407C, R410A, R507A, 514A, 1233ZD, 1234ZE
Sensing TechnologyInfrared sensor
Measurement Range0-1,000 ppm
Resolution1 ppm
Deadband20 ppm
Accuracy± 40 ppm @ 500 ppm
Response Time (T90)60 seconds
Warmup time15 minutes
Operating EnvironmentIndoor Use
Operating Temperature Range32° to 100°F (0° to 40°C)
Operating Humidity Range0 to 95% RH (non-condensing)
EnclosureABS – Polycarbonate
Size4 (H) x 11 (W) x 2.5 (D) in. (10.2 x 28 x 6.3 cm)
Weight2.33 lbs. (0.603 kg)
Visual IndicatorsNormal OperationLED blinks according to the sensor addresses on the 301EM-20
Failure IndicationLED will remain on

Showing all 13 results