HA72

  • HA-72PM panel mount rack (includes bezel/rack hardware)

    HA-72PM panel mount rack (includes bezel/rack hardware)

    $26,669.00
  • HA-72RM/1 one ST-72SM in full width 19 in. rack (64 channels)

    HA-72RM/1 one ST-72SM in full width 19 in. rack (64 channels)

    $20,366.00
  • HA-72RM/2 two ST-72SM’s in full width 19 in. rack (128 channels)

    HA-72RM/2 two ST-72SM’s in full width 19 in. rack (128 channels)

    $39,702.00

Honeywell HA72

The Honeywell HA72 controller is a flexible, scalable gas controller that works the way you need it to. Input/Output modules allow for sets of 16, 32, 48 or 64-channel monitoring. Deploy the HA72 as a robust standalone life safety solution or addressable network with gas monitors and other field devices. User-friendly and visually powerful, the HA72 interface puts you in control of mission-critical information and allows you to share it across the enterprise via a secure, password-protected interface.
Flexible & Feature Rich

• Configure HA72 to accept inputs from many sensor types and signal ranges. Daisy chain up to 128 HA72 controllers to expand the system to meet your needs

• Custom software auto-recognizes and addresses Honeywell gas monitors (XNX and Sensepoint XCD)

• Connect sensors directly to HA72 with bridge sensor input board, saving installation time and eliminating need for extra devices

• Use HA72 as a discrete life safety system or network to a PLC or DCS for addressable operation

• Multiple password levels allow Ethernet access according to user need or qualification

• Various enclosure options available for hazardous and non-classified areas

• Programmable relays allow for a single relay contact point of multiple devices

Advanced, User-Friendly Interface

• Full array of visual indicators (bar graphs, multicolor cells, flashing icons) and integrated alarm levels simplify and enhance monitoring, troubleshooting and trending functions

• Improved zone logic reduces false alarm incidents

• Touch & magnetic keypad allows non-intrusive operation in hazardous locations

• SD card logs over one year of data including concentration levels, alarm events, min/max, calibrations and alarm resets

• NEMA 4X, NEMA 4X Stainless Steel, full and half “19” Rackmount and NEMA 7 (Explosion-Proof) wall-mount options

• Modbus master/slave functionality allows for simultaneous sending and receiving of data, through four RS-485 serial ports

• Calibration and Authorization Modes facilitate and speed commissioning time: Mimic Mode allows viewing of other HA72 controllers on the host display
General Specifications
UseWall or rack/panel mountable digital gas controller for industrial or commercial use
DisplayQVGA 320 x 240 pixel graphic LCD with backlight; displays bar graphs, trends and engineering units in color
Five discrete LEDs indicate alarm status for five standard alarm relays
Ethernet PortModbus TCP Master/Slave port
Alarm Relays5 amp 30VDC or 250VAC resistive Form C
Analog Inputs (Optional)12 bit 4-20mA into 150 ohms input impedence; includes +power supply terminal for each channel for routing power to two or three wire transmitters
Analog Output (Optional)10 bit 4-20mA output; max load 800 ohms with nominal 24VDC power supply
Serial Port (Optional)Master and Slave RS-485 half or full duplex ports equipped with Tx / Rx LEDs
Protocol = Modbus RTU
Power Requirement10 – 30VDC (24VDC nominal)
12 Watts max
Operating Temperature Range-13°F to +140°F (-25°C to +60°C)
Housing OptionsNEMA 4X fiberglass wall mount
½ length 19" rack / panel mount
Full length 19" rack mount
WeightPanel mount ½ 19" rack:8 lbs.
Full 19" rack:12 lbs.
Compact Fiberglass:26 lbs.
Large Fiberglass:75 lbs.
Large 316 Stainless Steel:88 lbs.
Warranty12 months from date of commissioning or 18 months from date of delivery, whichever is less
Ratings and Certifications
Class I, Div. 2, Groups A, B, C and D
CAN/CSA-C22.2 No.152-M1984
ANSI/ISA-12.13.01-2000
CSA-C22.2 No. 213-M1987
UL Std No. 1604, Third Ed. – 1994
ANSI/ISA-12.12.01-2010
  • Placeholder

    Auxiliary standard alarm relay board

    $963.00
  • Placeholder

    Dual catalytic bead LEL module (requires 10-0191)

    $482.00
  • Placeholder

    I²C analog 16 input board including EXC terminals

    $3,180.00
  • Placeholder

    I²C analog 16 output board

    $3,180.00
  • Placeholder

    I²C bridge Sensor / mA input board (accepts up to 8 10-0192 modules)

    $2,589.00
  • Placeholder

    I²C discrete alarm relay board (16, 5A Form C relays)

    $3,180.00
  • Placeholder

    I²C programmable alarm relay board (16, 5A Form C relays)

    $3,180.00
  • Placeholder

    RS485 isolated expansion board

    $1,596.00
  • Placeholder

    100-240 Vac universal input 600 watt 24 Vdc Power supply (27.0 Amps)

    $781.00
  • Placeholder

    85-240 Vac universal input 150 watt 24 Vdc Power supply (6.2 Amps)

    $549.00
  • Placeholder

    16 in. long 40 pin I/O ribbon Cable

    $135.00
  • Placeholder

    6 foot long 40 pin I/O ribbon Cable

    $293.00
  • Placeholder

    6 foot long I²C Cable

    $61.00
  • Placeholder

    I²C 10 in. I/O Cable

    $31.00
  • Placeholder

    I²C 6 in. I/O Cable

    $26.00
  • Placeholder

    Replacement complete HA-72 front panel electronic nest assembly; 10-0373 is display stack w/ front panel and ribbon cable

    $18,624.00
  • Placeholder

    Replacement HA-72 front graphic panel

    $683.00
  • Placeholder

    Replacement HA-72 main I/O

    $2,802.00
  • Placeholder

    Replacement main I/O PCB fuse; 20 mm / 2 amp

    $31.00

  • HA-72N4 ST-72 in NEMA 4X large fiberglass enclosure

    HA-72N4 ST-72 in NEMA 4X large fiberglass enclosure

    $25,079.00
  • HA-72SS ST-72 in NEMA 4X 316 stainless steel enclosure

    HA-72SS ST-72 in NEMA 4X 316 stainless steel enclosure

    $27,449.00
  • HA-72CP ST-72 in NEMA 4X compact non metallic enclosure

    HA-72CP ST-72 in NEMA 4X compact non metallic enclosure

    $26,669.00