Single Gas Clip Plus

  • Single Gas Clip Plus 2 Year hydrogen sulfide (H2S) detector with Hibernate Mode

    Single Gas Clip Plus 2 Year hydrogen sulfide (H2S) detector with Hibernate Mode

    $165.00

Single Gas Clip Plus

Longer Life with "Hibernate" mode.



The Single Gas Clip Plus (SGC Plus), is a maintenance free handheld gas detector with built in “Hibernate” mode for detecting hydrogen sulfide H2S or carbon monoxide CO. “Hibernate” mode allows users to place this disposable single gas detector in a rested state when not in use. The SGC Plus is perfect for seasonal/turnaround contractors or rental fleets. When your job or turnaround is finished, simply synchronize the instrument with our GCT IR Link or SGC Dock to put the detector in a rested state. When you are ready to use the detector again, simply press the power button to reactivate.

Use it when you need it.



By hibernating the detector when not needed, you can spread 2 years of use over a 3 year period. This mode can only be enabled via IR communication with either the IR Link or SGC Dock. Only authorized personnel can place the detectors in “hibernate” mode.

Rugged and configurable.



The SGC Plus also provides the most advanced maintenance free disposable single gas detector on the market. The SGC Plus combines a rugged design with and reliability and advanced sensor resolution (0.1 ppm for H2S models). This detector allows for quick configuration adjustments to comply with current and future industrial health and safety gas exposure regulations.
  • Unmatched sensor reliability for hydrogen sulfide (H₂S) or carbon monoxide (CO)
  • “Hibernate” mode
  • Adjustable alarm set points
  • Real-time gas reading capability
  • 0.1 ppm resolution for H2S sensor and display
  • Two-way IR communication for event downloads, bump tests, detector configuration and firmware updates
  • Programmable unique 6 digit detector identification
  • Bump Test notification and confirmation when intervals are set
  • Calibration optional
  • Calibration notification and confirmation when intervals are set
  • Docking capability with Gas Clip Technologies SGC Dock
Size3.3 x 2.0 x 1.1 in. (85 x 50 x 28 mm.)
Weight2.7 oz. (76 g)
Temperature-40 to 122°F (-40 to +50°C) for CO and H2S, -31 to +122°F (-35 to +50°C) for O2
Humidity5% to 95% non-condensing relative humidity
Battery Life24 months of operation/ 2 minutes of alarm per day
AlarmsVisual, vibrating, audible (minimum 95dB)
LEDs4 red alarm bar LEDs
DisplayLiquid Crystal Display (LCD)
LogsLast 25 events. Newer events replace older events
Ingress ProtectionIP 67
WarrantyFull 2 years (SGC) or 3 years (SGC+)
Sensor TypeSingle plug-in electrochemical cell
User OptionsUser ID, Low Alarm, High Alarm, Calibration Interval, Bump Interval, Self-Test Interval, Calibration Gas, Display sensor/life remaining, Bump Due LED
ApprovalsINMETROIEx 15.0058 Ex ia IIC T4 Ga (-40°C (H2S,CO) / -35°C (O2) ≤ Ta ≤ +50°C)
  • Placeholder

    Back Case for SGC

    $15.00
  • Placeholder

    Dock Ethernet Conversion

    $700.00
  • Placeholder

    Dock Gas Cylinder Strap

    $10.00
  • Placeholder

    Dock Quick Coupler

    $15.00
  • Placeholder

    Dock USB replacement (for all GCT Clip Docks)

    $22.00
  • Placeholder

    Manual Regulator (non-dock use) use with all GCT detectors except MGC Pumps

    $175.00
  • Placeholder

    Single Gas Clip Dock Ethernet

    $2,995.00
  • Placeholder

    Single Gas Clip Dock Wall Mount Ethernet

    $2,995.00
  • Placeholder

    Alligator Clip replacement (for use with all GCT detectors)

    $10.00
  • Placeholder

    Alligator Clip Screw replacement (for use with all GCT detectors)

    $0.50
  • Placeholder

    Bubble Label for SGC-P-H replacement

    $3.00
  • Placeholder

    Calibration Cap replacement (for use with SGC & SGC PLUS)

    $10.00
  • Placeholder

    Case Screw for SGC & SGC-PLUS replacement

    $0.50
  • Placeholder

    Dock Charger replacement – std. 110v power supply (for all GCT Clip Docks)

    $25.00
  • Placeholder

    Dock High-Pressure Conversion

    $900.00
  • Placeholder

    Dock Thumb Screw replacement (for all GCT Clip Docks)

    $5.00
  • Placeholder

    Filter replacements – 10 Pack (for use with SGC, SGC PLUS, MGC & MGC-P)

    $20.00
  • Placeholder

    Filter replacements – 50 Pack (for use with SGC, SGC PLUS, MGC & MGC-P)

    $80.00
  • Placeholder

    Front Case for SGC Plus replacement

    $15.00
  • Placeholder

    Gasket for SGC replacements – 10 Pack (for use with SGC & SGC PLUS sensors)

    $10.00