The Eagle is the most versatile portable gas detector on the market. Equipped with features that are not available on most competitive units, the EAGLE is a powerful instrument that does more than just offer the standard confined space protection for LEL, O2, H2S and CO. Detection combinations never before offered in a portable gas monitor are now available featuring the industry’s widest selection of high quality, long life and field proven sensors.
Vaporized hydrogen peroxide gas detection (VHP) in fumigation disinfection of medical facilities, pharmaceutical environments, including cleanrooms, production filling lines, and chemical fogging for the food industry.
Unique EAGLE features include PPM or LEL hydrocarbon detection at the push of a button; infrared sensors for CO2, methane or hydrocarbons in LEL and % volume ranges; a methane elimination switch for environmental applications, a long list of super toxic gases and measurable ranges, and dual hydrophobic filters that increases its water resistant performance. The EAGLE has a strong internal pump with a low flow auto shut off and alarm, which can draw samples from up to 125 feet even with the dual hydrophobic filters in place. This allows for quick response and recovery from distant sampling locations. The EAGLE will continuously operate for over 30 hours on alkaline batteries or 18 hours on Ni-Cads. A variety of accessories are also available to help satisfy almost any application such as long sample hoses, special float probes for tank testing, continuous operation adapters, remote alarms and strobes, and dilution fittings, just to name a few.
Simultaneous detection of up to 6 different gases
Over 400 gas monitoring configurations
Sterilization and Disinfection Monitor
Chlorine dioxide ClO2
Vaporizedhydrogen peroxide H2O2 (VHP)
Wide range of toxic gases
PPM / LEL hydrocarbon detection
Powerful long-life pump up to 125’ range with filters
Up to 30 hours of continuous operation
Dual hydrophobic filters (most versions)
IR Sensors available for CO2, % LEL CH4 or HC, % volume CH4 or HC
Weather resistant, chemical resistant, RF/EMI coated high impact polycarbonate polyester blend. Can be set in rain or into 2.5 inches of water without damage. Ergonomically balanced with rugged top mounted handle.
10.5″ long x 5.9″ x 7″ tall
Catalytic combustion, electrochemical cell, galvanic cell, and infrared.
2 years under normal conditions.
Powerful, long-life pump (over 6,000 hours) can draw samples over 125 feet. Flow rate approximately 2.0 SCFH.
4 x 20 LCD readout with backlighting. Viewed through window in case top. Displays readings & status of all channels simultaneously.
2 alarms per channel plus TWA and STEL alarms. Fully adjustable for levels, latching or self reset and silenceable.
Buzzer 85dB at 30 cm, dual high intensity LED’s, and blinking display.
6 external push buttons for operation, demand zero, and autocalibration. Buttons also access LEL/ppm, alarm silence, peak hold, TWA /STEL values, battery status and many other features.
Continuous Operating Hours
30 hours minimum using alkaline batteries, or 18 hours using Ni-Cads.
Size D batteries, 4 alkaline or Ni-Cad. Charger has alkaline recognition to prevent battery damage if alkalines are charged.
Operating Temp. & Humidity
-10°C to 40°C (14°F to 104°F), 0 to 95% RH, non-condensing.
Maximum variance +/- 5% of full scale.
30 seconds to 90% (for most gases).
Intrinsically Safe, Class I, Division 1, Groups A, B, C and D. CSA / NRTL & UL Classified (most versions).
Shoulder strap, alkaline batteries, hydrophobic probe, and 5 foot hose (for special toxic gas versions, shorter teflon hose used without probe).