PS 2

  • PS 2 for LEL Detection, 24 VDC powered

    $425.00
  • PS 2 for LEL Detection, 115 VAC powered

    $435.00
  • PS 2 for LEL Detection, 48 VDC powered

    $495.00

PS 2

The RKI Model PS 2 is a perfect low cost solution for hydrogen detection in battery rooms, or for LEL or PPM level detection of a variety of flammable or solvent vapors in general industry.

The Model PS 2 is a multipurpose gas monitor utilizing a MOS (metal oxide sensor) for long lasting and low maintenance detection at the LEL or PPM levels of many gases or vapors. The PS 2 has two alarm levels for increasing gas or vapor levels, at the PPM level for detection of many solvent vapors, or for LEL level detection of flammable vapors. Inquire at the factory for your specific requirement. Each alarm level activates a 12 amp relay inside the unit, and terminals are provided for wiring the relay to activate an external alarming device or some other device such as a ventilation fan.

This stand alone unit is housed in a durable plastic enclosure with flanges provided for wall mounting and is designed with easy access wiring hubs on the bottom of the unit. The front of the PS 2 contains three lights; Pilot, Alarm 1, and Alarm 2. An internal audible alarm (85 db) is also built in which activates in a gas alarm condition.

The standard PS 2 is supplied with the gas sensor located on the end of a 30 foot cable (other cable distances are also available). Each unit is powered by 115 VAC standard or 24 VDC as standard (48 VDC versions optional), and the AC version comes complete with a 6′ power cord.
  • LEL or PPM detection ranges available for many gases
  • 2 alarm levels
  • Stand alone system
  • Input voltages: 115 VAC standard, 24 VDC or 48 VDC (optional)
  • Audible and visual alarms
  • Compact design
  • Simple installation
  • AC version equipped with power cord
  • Relay contacts rated 12A @ 115 VAC
  • Low maintenance
  • Battery storage locations
  • Petrochemical plants
  • Refineries
  • Water & wastewater treatment plants
  • Degreasers
  • Gas, telephone, & electric utilities
  • Manufacturing facilities
  • Steel
  • Automotive
  • HVAC
Outputs
Relays12 amp rated contacts for each alarm
Audible85 db alarm at 10 cm
VisualAlarm 1Orange LED
Alarm 2Red LED
Environmental
Operating Temp35°F to 120°F (2°C to 49°C)
Relative Humidity10 - 95% RH, non condensing
Physical
DimensionsHeight6.85”174 mm
Width6.48”165 mm
Depth3.30”84 mm
EnclosureABS plastic, indoor housing
Sensors
Sensor TypesMetal Oxide Semiconductor type (MOS)
Measuring RangesLEL levels available for many gases. Typically set to 10% LEL for alarm 1, and 25% or 30% LEL for alarm 2 (Highest possible setting is 30% LEL).
Sensor ConnectorSensor is connected to 30ʼ extension cable wired to terminals inside unit. Cable length can be decreased or increased as needed.
Power24 VDC (standard)
115 VAC or 48 VDC (optional)
WarrantyOne year materials and workmanship
Detectable Gases

The PS 2 uses a Metal Oxide Semiconductor (MOS) type sensor for the detection of gases and vapors. This MOS sensor is known for its very long life and truly low maintenance requirements. The PS 2 and its MOS sensor effectively respond to a wide variety of hydrocarbons and other gases or vapors. Alarms can be set for OSHA established TLV levels for many gases or solvent vapors, and at LEL levels for flammable vapor warnings.

Since the PS 2 sensor is a general hydrocarbon sensor, it is not specific for any particular gas. This instrument will perform best if used in an area where the only gas or vapor present, besides fresh air, is the gas or vapor that you wish to detect. If used in an area contaminated with many different gases or vapors, false alarms may occur. Please carefully evaluate the application and the area to ensure that no interfering gases are present.

The PS 2 is an effective solution for solvent vapor monitoring around degreasers or other processes, hydrogen monitoring in battery rooms, natural gas detection in basements around landfills, and many others. Please consult the factory for practical alarm points for your application.
Ethyl AlcoholC2H5OH
GasolineCnHm
HexaneC6H14
HydrogenH2
Iso-Butanei-C4H10
Isopropyl Alcohol(CH3)2CHOH
MethaneCH4
Methylene ChlorideCH2Cl2
PerchloroethyleneCCl2CCl2
TolueneC7H8
TrichloroethaneClCH2CHCl2
XyleneC6H4(CH3)2
  • Placeholder

    Sensor assembly for PS 2, LEL, with 30’ cable

    $100.00
  • Placeholder

    Sensor assembly for PS 2, PPM, with 30’ cable

    $100.00
  • RKI PS 2 Calibration Kit, 103L steel cyl 10% LEL (4,000 ppm) Hydrogen in Air, 103L steel cyl 30% LEL Hydrogen in Air, reg with gauge & knob, cal cup for PS 2, screwdriver, case & tubing

    RKI PS 2 Calibration Kit, 103L steel cyl 10% LEL (4,000 ppm) Hydrogen in Air, 103L steel cyl 30% LEL Hydrogen in Air

    $495.00
  • RKI PS 2 Calibration Kit, 103L steel cyl 10% LEL Propane in air, 103L steel cyl 30% LEL Propane in air, reg with gauge & knob, cal cup for PS-2, screwdriver, case & tubing

    RKI PS 2 Calibration Kit, 103L steel cyl 10% LEL Propane in air, 103L steel cyl 30% LEL Propane in air

    $495.00
  • RKI PS 2 Calibration Kit, 34L cyl 10% LEL (4,000 ppm) Hydrogen in Air, 34L cyl 25% LEL Hydrogen in Air, reg with gauge & knob, cal cup for PS 2, screwdriver, case & tubing

    RKI PS 2 Calibration Kit, 34L cyl 10% LEL (4,000 ppm) Hydrogen in Air, 34L cyl 25% LEL Hydrogen in Air

    $335.00
  • RKI PS 2 Calibration Kit, 34L cyl 10% LEL (4,000 ppm) Hydrogen in Air, 34L cyl 30% LEL Hydrogen in Air, reg with gauge & knob, cal cup for PS 2, screwdriver, case & tubing

    RKI PS 2 Calibration Kit, 34L cyl 10% LEL (4,000 ppm) Hydrogen in Air, 34L cyl 30% LEL Hydrogen in Air

    $335.00
  • RKI PS 2 Calibration Kit, 34L cyl 10% LEL Methane in Air, 34L cyl 25% LEL Methane in Air, reg with gauge & knob, cal cup for PS 2, screwdriver, case & tubing

    RKI PS 2 Calibration Kit, 34L cyl 10% LEL Methane in Air, 34L cyl 25% LEL Methane in Air

    $335.00