EC-600 carbon monoxide monitor, 0-150 ppm, 115 VAC operation with 10 meter sensor cable


SKU: 73-1204-10 Categories: , , , , Tags: ,



RKI’s Model EC-600 is an indoor monitor that detects Carbon Monoxide (CO) with a range of 0-150 ppm. It’s a sleek low profile design which lends itself to laboratory or commercial applications. The EC-600 comes ready to operate with a simple wall mount bracket and 10 foot power cord. If Carbon Monoxide is present, the user is notified by an audible alarm tone and multicolored LED display. The EC-600 uses a fast responding low-cost plug-in style electrochemical sensor. This long life sensor is field-replaceable with no special tools required.
  • Compact, wall mounting design
  • Highly visible 3 color LED digital display
  • Power cable can enter from any direction
  • Stores alarm summary data
  • Built in audible and visual alarms
  • 115 VAC operation
  • Relay outputs for annunciation of alarms
  • Low cost plugin electrochemical sensor
  • Iron and steel industry
  • Laboratories
  • Boiler rooms
  • Garages
  • Vehicle service areas
  • Engine testing
  • Shipping / receiving docks
  • Multi-occupancy residences
Model: EC-600 Measuring Gas: Carbon monoxide (CO) Sampling Method: Diffusion Physical Dimensions: 95(W) x 135(H) x 35(D)mm Weight: Approx. 420g (Approx. 220g in case of DC 24V version) Display: 3 digits, 3 color LED (Green, Orange, Red) Normal: Green Mounting: Wall mounting type (by using accessory mounting plate or mount at one switch box) Cable inlet: Up, down and left/right, or rear side Environmental Operating Temp: 0-40ºC (0 to 104ºF) Relative Humidity: below 90% RH (non-condensing) Sensors Sensor Types: Electrochemical Measuring Ranges: 0-150ppm (1ppm / digit) Outputs Type of Alarms: Gas alarm: 2 level alarm (Latched mode / cancelled by reset switch) Trouble alarm: Sensor connection trouble (Non-latched mode) Preset Alarm Levels 1st: 50 ppm, 2nd: 100 ppm Relays AL1 / AL2 Form A common, contact capacity: 125V 1A (Resistive load) Visual 1st Alarm: Flashing orange LED with gas display AL1 LED orange color flashing, intermitted buzzer sound 2nd Alarm: Flashing red LED gas display AL2 LED red color flashing, intermittent buzzer sound Trouble Alarm: Red flashing display “D-**” (**shows error No), short intermittent buzzer sound Power: AC 115V 50/60Hz, Power consumption: Max 3.5VA, Power cable: 3m accessory (standard) Option: (DC 24V, Power consumption: MAX 2.0 W) Warranty: One year materials and workmanship.

Additional information

Weight 0.93 lbs
Dimensions 1.38 × 3.74 × 5.31 in